Ive recently taken on the project of setting up our UC540 system Ive setup some basic handsets and features but I seem to have an issue with my test handset and softphone working on the same extension.
I use a 7975 Ext 206 and the softphone also has ext 206 so if I get a call they both ring together, however when I use CCA it shows an error in the user extensions saying that both phones have the same extension and wont save or allow me to change the config..
I also want to setup the reception handset with ext 200 with other users ranging from 201 onwards, is that possible?
Looking forward to my actual UC training as a reseller
I have used this document many times to set up an extension on two phones. Although it is based on CCA 2.0, the process is the same in CCA 2.2.4. The key is to SHARE the extension on both the CIPC and the 7975. Also, be sure to set up the voicemail so both extension are able to access the same voicemail box.
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 126.96.36.199 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 188.8.131.52 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...