cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

3492
Views
0
Helpful
1
Replies
bluesheep11
Beginner

UC540 Voicemail PIN reset

I can see from the dicussions various posts about resetting a voicemail PIN through CCA and it not being possible and you need to use the GUI at 10.1.10.1.

I have tried to browse to the GUI and it doesn't work, if i try to ping 10.1.10.1 i get a response from the IP of the UC540.  I know you can do it via CLI:

UC540#service-module integrated-Service-Engine 0/0 session

se-10-1-1-117# user (username) pin (value)

However when i try the service-module integrated-Service-Engine 0/0 session command it errors with connection refused by remote host.

ANy ideas?

1 ACCEPTED SOLUTION

Accepted Solutions
paolo bevilacqua
Hall of Fame Master

Cannot reach CUE is due to routing problem, e.g. you internet router knows nothing about 10.1.10.x

For CLI access, do a 'session clear' before 'session'.

View solution in original post

1 REPLY 1
paolo bevilacqua
Hall of Fame Master

Cannot reach CUE is due to routing problem, e.g. you internet router knows nothing about 10.1.10.x

For CLI access, do a 'session clear' before 'session'.

View solution in original post