UC560 CCA 3.1: Class of restrictions

[Roman Rodichev]

To simplify it:

- two FXO ports

- one IP Phone should dial out through one FXO port (trunk group 1)

- second IP Phone should dial out through second FXO port (trunk group 2)

I can do this with COR in CLI, but don't want to do it because of CCA and support issues.

Any way to do this in CCA?

[Darren DeCroock]

Hello Roman,

Currently, there is not a way to do this though CCA.  (At least not that I am aware of...)

Thank you,

Darren