cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1428
Views
0
Helpful
0
Replies
Highlighted
Beginner

uc560 fax relay to fxs port

Hi

I have my uc560 with a sip trunk and a fxo line

I use the fxo line to have fax to email, and is working fine

But i also need one more fax machine with a internal extension that will be accessed by the sip trunk, my ISP supports t.38

My max machine is my fxs port 0/0/0 and in the cca was configured as fax

dial-peer voice 1 pots

description ** CCA Analog Fax **

destination-pattern 3309

port 0/0/0

no sip-register

Globally i configured the t38

voice service voip

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco

And in all incoming and outgoing dial-peers of the sip trunk

dial-peer voice 20 voip

corlist outgoing llamada-local

description ** Llamadas locales **

translation-profile outgoing Salida_PSTN

preference 2

destination-pattern 9[2-7]......

session protocol sipv2

session target sip-server

voice-class codec 1 

voice-class sip dtmf-relay force rtp-nte

dtmf-relay rtp-nte

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco

no vad

!

dial-peer voice 3002 voip

description fax2

translation-profile incoming fax2_Called_10

incoming called-number 4011115

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco

!

When is try to send a fax to the 4011115 that have a translation-rule to 3309, the fax tone sounds a moment and late hung

So, i will like to know?

1. If a have fax to mail enable, can i have fax relay to fxs port?

2. If its possible, is something wrong with my configuration?

3. Which debugs can i applied to check alls rigth?

Regards

0 REPLIES 0