This can happen at times if the UC-560 had issues during the activation process, I would advise to check and see if the license file as actually deposited on the Flash card anyway as at times it does. If not then you will need to manually activate the license through the website (Don't remember it of the top of my head).
If you have to do it manually, then you can use CCA to do it, or via CLI which will work as well.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 188.8.131.52 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 184.108.40.206 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...