Showing results for 
Search instead for 
Did you mean: 

UC560 Phone configuration issue

Hi there:

My scenario : UC560 connected to 7975 and 7965 ip phones. Here all features are working fine except users are not able to access their phones for personalisation.They canr configure Personnel Address Book, or customized ring tones bcoz of this.

UC560#sh ip int br

Interface                  IP-Address      OK? Method Status                Prot                                                                             ocol

GigabitEthernet0/0         unassigned      YES NVRAM  up                    down                                                                            

In0/0                   YES TFTP   up                    up                                                                              

GigabitEthernet0/1/0       unassigned      YES unset  up                    down                                                                            

GigabitEthernet0/1/1       unassigned      YES unset  up                    up                                                                              

GigabitEthernet0/1/2       unassigned      YES unset  down                  down                                                                            

GigabitEthernet0/1/3       unassigned      YES unset  up                    up                                                                              

Vlan1                 YES NVRAM  up                    up                                                                              

Vlan5                      unassigned      YES NVRAM  up                    up                                                                              

Vlan90                  YES NVRAM  up                    up                                                                              

Vlan600               YES NVRAM  up                    up                                                                              

NVI0                       unassigned      YES unset  administratively down down  

UC560#sh ip rout

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

       E1 - OSPF external type 1, E2 - OSPF external type 2

       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

       ia - IS-IS inter area, * - candidate default, U - per-user static route

       o - ODR, P - periodic downloaded static route, + - replicated route

Gateway of last resort is to network

S* [1/0] via is variably subnetted, 9 subnets, 4 masks

C is directly connected, Vlan90

S is directly connected, Vlan90

L is directly connected, Vlan90

S is directly connected, Integrated-Service-Engine0/0

S [1/0] via

C is directly connected, Vlan1

L is directly connected, Vlan1

C is directly connected, Vlan600

L is directly connected, Vlan600

running config has attached with this.. Please revert back if anyone cud find the reason.


Hall of Fame Master

personal speed dial and BLF-speed dial are accesed from services button on the phone

ringtones from settings

doesn't that works for you ?