UC560 Wan port VLAN

[j-belanger]

Hi, is there a way to change the VLAN port on the WAN port of the UC560?

I'm trying to use VLAN50 on WAN port and I'd like to have that setup in the network configuration o the UC560.  Is there a way to do this?

Thanks in advance!

Jason

[paolo bevilacqua]

This is done configuring subinterfaces under WAN interface and setting the vlan ID on it.

Note I have no idea if the GUI can do that. CLI certainly does.

[j-belanger]

Do you know how I can download the CLI and what is the instructions on setup the VLAN50 on WAN port?

I'd like to give that a try and get it working.

Let me know

Thanks

Jason

[j-belanger]

I will connect using telnet probably but I need the instructions on how I can change the VLAN of the WAN port (gigabitethernet0/0) of the UC560 to VLAN50.

Thanks

Jason

[paolo bevilacqua]

It is the same as with any other Cisco router. If you do not have experience the better approach is that you get someone that does, otherwise you can look at the documentation or search forums.