01-21-2011 09:05 AM - edited 03-21-2019 03:33 AM
Hi
I am having an issue with configuration of hunt groups can the [strike]Borg[/strike] Board help me?
I have a new UC540 and have configured a hunt group with 2 members and associated extensions (2 just now - more to follow) - the users and extensions are in the group. When dialling the primary extension internally, it does not connect - audible busy tones.
There is a soft key on the handset for logging in and out of the hunt group - both phones display this
Hunt group extension = 234
3 phones configured - 302, 230, 240
302 and 240 are in hunt group
All phones can call each other
I used Cisco Config Assistant and Config Wizard to set it up
Here is the config:
ephone-hunt 1 peer
pilot 234
list 302, 240
final 888
timeout 8, 8
no-reg pilot
statistics collect
description Helpdesk
ephone 5
device-security-mode none
mac-address 1CDF.0F4A.9802
ephone-template 16
max-calls-per-button 2
username "user1" password 123456
type 502G
button 1:296
!
!
!
ephone 6
device-security-mode none
mac-address 1CDF.0F4A.980A
ephone-template 16
max-calls-per-button 2
username "user2" password 123456
type 502G
button 1:297
!
!
!
ephone 7
device-security-mode none
mac-address 1CDF.0F4A.9813
ephone-template 16
max-calls-per-button 2
username "user3" password 123456
type 502G
button 1:39
UC_540#sh ephone-hunt
Group 1
type: peer
pilot number: 234, peer-tag 20041
list of numbers:
302, aux-number A234A0000, # peers 1, logout 0, down 0
peer-tag dn-tag rna login/logout up/down
[20040 296 0 login up ]
240, aux-number A234A0001, # peers 1, logout 0, down 0
peer-tag dn-tag rna login/logout up/down
[20042 297 0 login up ]
final number: 888
preference: 0
preference (sec): 7
timeout: 8, 8
description: Helpdesk
hops: 2
next-to-pick: 2
E.164 register: no pilot
auto logout: no
stat collect: yes
callqueue display: continuously
debug: no
Any thoughts please?
Thanks
01-21-2011 11:36 AM
IS 302 and analog line? What type of role is setup for that FXS Port?
Brian
02-02-2011 02:37 AM
Hi
302 is the extension - the pilot number for the group internally is 234
FX0/1/0 and 0/1/1 are set to trunk - they will go to the exisiting BT lines when we swap out the existing kit for the UC540
Cheers
02-02-2011 07:19 AM
I think what brian is asking is the FXS extension (302) operation mode.
Is it User Mode, COmmon Area, or FAX?
02-03-2011 08:04 AM
Hi
This was resolved by using the no ephone-hunt login command
Thanks for assisting
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: