cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

1685
Views
0
Helpful
2
Replies
jarrod sousa
Beginner

Visual Voicemail for UC500/CME with CUE

Has anyone successfully deployed a solution that converted a recorded audio voicemail into a text based message like an e-mail or SMS?  i have a customer looking for this capability and wasn't sure if Cisco had something that could accomplish this or not.  it would be preferred to do this in CUE, but if the need to move to a unity/unity cxn platform that would be fine too.  thanks in advance for your help!

1 ACCEPTED SOLUTION

Accepted Solutions
Brandon Buffin
Advisor

Unity Connection 8.x includes SpeechView which converts voicemails to text.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag177.pdf

You could also use a service such as PhoneTag.

http://www.phonetag.com

This would require that you configure CUE to send a message notification along with the attached voicemail to a PhoneTag address. The message would then be converted to text and sent to the email addresss of your choice.

Here are the steps for enabling message notification.

http://uc500.com/enabling-message-notification-cisco-unity-express

Hope this helps.

Brandon

View solution in original post

2 REPLIES 2
Brandon Buffin
Advisor

Unity Connection 8.x includes SpeechView which converts voicemails to text.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag177.pdf

You could also use a service such as PhoneTag.

http://www.phonetag.com

This would require that you configure CUE to send a message notification along with the attached voicemail to a PhoneTag address. The message would then be converted to text and sent to the email addresss of your choice.

Here are the steps for enabling message notification.

http://uc500.com/enabling-message-notification-cisco-unity-express

Hope this helps.

Brandon

Perfect, thanks for the help!