cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

1288
Views
0
Helpful
1
Replies
Brook Powers
Beginner

Which version Anyconnect for UC540 teleworker

Which version of Cisco AnyConnect software do I have to download in order to upload it to the UC540 in order to put the UC540 in FULL TUNNEL mode so that remote teleworkers with a SPA525G2 can connect via VPN?

PS: And if the phones have a BUILT-IN VPN Client, why do I have to upload a VPN software packagae to the UC540 at all?

PPS: Why doesnt the link to the Cisco AnyConnect software in CCA 3.2.1 work?             

1 REPLY 1
Brandon Turpin
Cisco Employee

Hi Brook,

You can upload 2.5.6005, which is available on Cisco.com, and that should work.  The AnyConnect package needs to be installed on the router in order to enable client connections to the router whether or not the phones have the client built-in.  It's a requirement of IOS.

Will need to look into the link to the AnyConnect software in CCA 3.2.1.

Hope that helps.

Thanks,

Brandon

This widget could not be displayed.