All the SPA525G and SPA525G2 handsets we support on UC500s are showing the date as the 02/02/2012.Including our own!
None have an NTP server set, so they shouldn't be getting incorrect time data from anywhere.
SPA524s and SPA509s on the same systems seem fine.
The actual UC500s (mix of UC520 and 540s) have the correct date on them.
So I was on the phone with one of the best techs at the Cisco Small Business, Lindsey and they are actively working on a resolution to the Groundhog Day Anomaly (I still am trying to coin this phrase) on the 525G phones. I expect there to be a firmware update for the phones later today.
Having being notified of the very same issue by a customer today, I was going to sort this first thing in the morning thinking it was a configuration issue, but it seems the config is not the case. If it wasn’t for the original poster I would have been none the wiser, so thanks Adam
Got the same Problem.
40 pieces of SPA525G / G2 on a UC560 and the phone is one day up.
Setting manally the 01.02.2012 on CLI the phone shows 02/02/2012...
please hurry up with an sollution....
Great, I thought I was going crazy. We have 1 x 525g2 (v.7.4.8) here in the office and it's one day up too. All other 7900 phones are fine. We have 2 other customers that have also reported that their date is up by one day too.. But today they're getting ansy (as all small -Mid businesses do)..
Just a quick update on this. It looks like there is an issue with the logic for the date due to the leap year that affects the date for the month of February. Only the date displayed on the LCD is affected and only for the month of February. The web gui has the correct date.
We are working on a patch for this and will post an update as soon as we have more information.
What is the best way to resolve this so the phone displays the correct date while we await a patch?
If the web GUI is right, and the phone GUI is wrong, then setting the web GUI back -1 may cause other issues as well as SNTP sync problems.