Prime Collaboration Assurance - How to configure Voice Gateways

[tiagofo]

Olá, Pessoal

Eu recentemente instalei o servidor PCA com a licença advanced e preciso incluir o cluster do CUCM e gateways de voz. Eu não encontrei como adicionar o GWs de voz.

Fonte de consulta - http://docwiki.cisco.com/wiki/Setting_up_Devices_for_Prime_Collaboration_Assurance#Required_Protocols_for_the_Devices

Fonte de consulta - https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-0/Assurance/Advanced/Guide/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_11_0/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_11_0_chapter_01100.html

[Leonardo Santana]

Olá Thiago,

Verificando a documentação os gateways são descoberto através do CUCM:

Unified CM Cluster Data Discovery

After the Unified CM publisher is managed in Cisco Prime Collaboration, you must collect the additional inventory data by performing the Cluster Data Discovery. This discovery helps you to collect:

• Cluster configuration data including Redundancy group, Devicepool, Location, Region, RouteList, RouteGroup, RoutePattern, Partition, and so on. This also includes the entities provisioned in the cluster such as phones, voice mail endpoints, media resources, gateways, and trunks.

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-0/Assurance/Advanced/Guide/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_11_0/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_11_0_chapter_01101.html

Att

Leonardo Santana