11-09-2006 07:46 PM
I've a 2801 router with a frame relay conection and public pool directions. I want to create vpn tunnels but the client is a linksys rv042 vpn router. Anyone have some information for this configuration. Thanks, Regards.
Solved! Go to Solution.
11-11-2006 10:02 PM
Hi,
Please refer the below URL for configuratin of IPSEC Tunnel between Two Cisco Routers. This should be handy while setting up the tunnel to the Linksys.
You can get the User Guide for Linksys RV042 from the below URL and guide lists configuration guidelines for VPN.
Let me know if it helps.
Regards,
Arul
** Please rate all helpful posts **
11-11-2006 10:02 PM
Hi,
Please refer the below URL for configuratin of IPSEC Tunnel between Two Cisco Routers. This should be handy while setting up the tunnel to the Linksys.
You can get the User Guide for Linksys RV042 from the below URL and guide lists configuration guidelines for VPN.
Let me know if it helps.
Regards,
Arul
** Please rate all helpful posts **
11-12-2006 07:48 AM
Hi,
Thanks, this information is very good for me.
Regards,
Jose
11-11-2006 10:03 PM
Hi,
Please refer the below URL for configuratin of IPSEC Tunnel between Two Cisco Routers. This should be handy while setting up the tunnel to the Linksys.
You can get the User Guide for Linksys RV042 from the below URL and guide lists configuration guidelines for VPN.
Let me know if it helps.
Regards,
Arul
** Please rate all helpful posts **
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: