Guys and Gals, Help Please !! This is driving me slightly crazy.
I have a client with a 2Mbps PSTN ADSL line which keeps having intermittent problems.
The physical line stays up but the Virtual-Interface 2 drops and the only way to cure the problem is to re-boot the router. This happens 2 to 3 times a day.
At first I thought it was the router so we removed the SOHO97 and purchased a new 857 running 12.4 (sorry don't have exact image details at the moment) and we are still facing the same problem.
I've spoken with the provider and they tell me the line is okay. I entered the following command (Please see attachment), is there anything from this output that points to the problem or is there something else I need to do.
I work in a DSL team, and This issue is ISP related. Or at least with the DSL line itself.
As you can notice, the Noise Margin during the outage gets too low:
Noise Margin: -2.5 dB 31.0 dB
While during normal operation it stays between 10 and 31 which is a perfect value:
Noise Margin: 11.0 dB 31.0 dB
Have your ISP check the line from your site, and also, a good workaround in the meantime would be replacing the Microfilter that your DSL line should be using... if you're not using one, i'd suggest you buying one and installing it on the DSL line.
Community Live Slides- How to optimize your Cisco Security investments with Threat Response
(Live event - formerly known as Webcast- Tuesday February 18, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Tuesday 18th, ...
Two main issues I am facing as part of ISE guest access POC lab.On any device on first attempt connections works smooth. However, if I disconnect and reconnect the SSID, its repeatedly giving "Couldn't get an IP address" or "No internet connection" on con...
Microsoft published a security advisory providing guidance to increase the security for communications between LDAP clients and Active Directory domain controllers. The document introduced the use of LDAP channel binding and ...
Hi, Hoping someone can help. I am getting the following error message when trying to connect to Cisco any connect: Cisco connection attempt has failed due to network or PC issue.Does anyone know how to solve this issue?
Dear all,can you please share, based on your experience, how should looks like an Endpoint Purge Policy? I would like to Purge all the Endpoints that didn't authenticate during the last 6 months, for example. Thanks,M.