01-18-2010 07:28 AM - edited 02-21-2020 04:27 PM
Hello,
We have a machine that was upgraded from Windows Vista x64 to Windows 7 x64. After doing this the Anyconnect client comes back with "Unable to establish VPN". After going through the readme on the AnyConnect client, it says to uninstall before doing the upgrade. Well, too late on that. I've tried un-installing and re-installing, but it comes back with the same error. We even removed all information from the profile after un-installing and rebooted before re-install. We are using the latest 2.4.1012 version. Any ideas on how to solve this?
Thanks!
01-18-2010 12:14 PM
Hi:
I have the same problem with Windows 7 x32. I already try with Anyconnect 2.3 and 2.4 with ASA and IOS router. ASA log is %ASA-5-722010
Leo
03-03-2010 03:25 PM
I faced same issue with W7 RC upgrade to retail version. I got it fixed by changing ASDM:Configure,RA-VPN,Network(client)Access,GroupPolicies,my policy,Advanced,SSLVPNClient,KeepInstallerOnClientSystem to value No (this forces to remove and reinstall client). worked like charm after that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide