09-27-2012 08:55 AM - edited 02-21-2020 06:21 PM
Hi all,
I need you support regarding my configuration attached.
My question is why using AnyConnect I can't make the autentication.
Consider that:
1. Cisco AnyConnect work properly with LOCAL user
2. test aaa-server authentication GOADC host 192.168.99.1 username ... password ....
return:
INFO: Attempting Authentication test to IP address <192.168.99.1> (timeout: 22 seconds)
INFO: Authentication Successful
Let me know what missing.
Thank's in advance
Best Regard
Solved! Go to Solution.
09-27-2012 10:18 AM
Hi Parker,
According to your configuration you are using the DefaultWebVPNGroup.
So, for this to work, do the following:
tunnel-group DefaultWebVPNGroup general-attributes
authentication-server-group GOADC
!
Let me know how it goes.
Thanks.
Portu.
Please rate any helpful posts
09-27-2012 10:18 AM
Hi Parker,
According to your configuration you are using the DefaultWebVPNGroup.
So, for this to work, do the following:
tunnel-group DefaultWebVPNGroup general-attributes
authentication-server-group GOADC
!
Let me know how it goes.
Thanks.
Portu.
Please rate any helpful posts
09-28-2012 09:05 AM
Seems ok,
now login is successfully autenticated... I have to check with the Active Directory administrator.
Thanks a lot.
Bye
09-28-2012 10:03 AM
Awesome!
Hope you have an amazing weekend
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: