AnyConnect connection attempt and certificate error, then it works
I am using AnyConnect Client 3.1.04063 connecting to ASA5540 running 9.1 code. Certificates signed by trusted CA (company CA not public CA) are installed on the ASA and the same company root cert exist on the client computer as well - so the user is never prompted to trust a certificate. From the user perspective, its working as when the "Connect" button is clicked, the username/password opens up and on submitting that, the connection is established without any other pop-up being dispalyed. However, the log window on the anyconnect client displays this:
Setting up some 3rd party devices for my Fire and Rescue trucks that will VPN back to our FPR-2110. I can blatantly see what's going on with the IKEv2 platform and protocol debugs on. It's selecting the wrong dynamic map!IKEv2-PLAT-4: (32): Cry...
On January 22, 2020, the Cisco Product Security Incident Response Team (PSIRT) disclosed a vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC). The vulnerability could allow an unauthenticated, remote attac...
Meet the Authors Event - A Cybersecurity Deep Dive with Omar Santos
(Live event – Thursday, January 23rd, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event will have place on Thursday 23rd, January 2020 at 10hrs PDT
Posting this for anyone interested in using a Raspberry PI as a flow collector for Stealthwatch. We created a very lightweight version of our software. It can create flows if the eth port is attached to a SPAN or you can forward NetFlow/IPFIX ...