AnyConnect invalid certificate

[benjamin_a]

Hi

I am having some problems with my AnyConnect configuration.

I have configured AnyConnect (ssl vpn / webvpn) on my Cisco 1841 Router, and I can access it from a web browser and start the tunnel, then anyconnect starts up and then the problem come, because when AnyConnect is trying to connect it comes with an error saying "The certificate on the secure gateway is invalid".

I have read almost all of the threads in here about the problem also tried to make a new certificate, but nothing is working

BTW: I am using self-signed certificate

I have attached the running config, if it helps.

Hope that there is any one who can help.

/Benjamin

[Andrew Phirsov]

The certificate of your ASA (wich in your case is self-signed) should be installed on client's PC (where anyconnect client is installed) certificate store as Trusted root CA certificate.

[benjamin_a]

Hi

The problem is that it is not a ASA Firewall, but is it the same on a IOS router ?

[Andrew Phirsov · Accepted solution]

It doesn't matter. Client just should trust the certificate of a vpn-gateway.

[benjamin_a]

Okay, can you tell me how I export the certificate from the router ?

[benjamin_a]

Got i working now, Thanks for your help !

[bleuangel]

Hello,

I'm also experiencing the same issue. Could you please help me what steps have you done to make it work?

Thanks much.

[muralise]

Can anyone guide me with steps to fix issue?

[Snowdude005]

Hi

How did you resolve this I have the exact same issue on a router.

Thanks in Advance