Solved: Anyconnect IOS Radius

johan oosterwaal · ‎02-05-2014

Hallo,

i hace a cisco 881 router with a Anyconnect VPN. the web interface works

but when i enter a username i'm getting a login failt.

looking at the Eventviewer of the NPS i can see that is is using the wrong NETWORK and CONNECT POLICY,

it needs to use the VPN policy.

configuration router Radius:

aaa group server radius VPN

server 172.16.200.10 auth-port 1645 acct-port 1646

configuration router AnyConnect:

webvpn gateway ANYCONNECT

ip interface FastEthernet4 port 8080

ssl trustpoint TP-self-signed-4264276022

inservice

!

webvpn install svc flash:/webvpn/sslclient-win-1.1.4.176.pkg sequence 1

!

webvpn context ANYCONNECT-CONTEXT

title "welcome to office"

ssl authenticate verify all

!

policy group ANYCONNECT-POLICY

functions svc-required

svc address-pool "Pool"

svc keep-client-installed

svc dns-server primary 8.8.8.8

default-group-policy ANYCONNECT-POLICY

aaa authentication list VPN

gateway ANYCONNECT

inservice

WHAT IS GOING WRONG?

Marcin Latosiewicz · ‎02-05-2014

Looks like settings on your server.

Have a look at:

Step 2.

Marcin Latosiewicz · ‎02-05-2014

Looks like settings on your server.

Have a look at:

Step 2.

johan oosterwaal · ‎02-05-2014

Yes that was the problem

i needed to remove the NAS Port type and enter only a NAS IP address.

thanks!