cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
628
Views
0
Helpful
0
Replies
Beginner

AnyConnect not getting correct network setting

I'm testing out AnyConnect with our new ASA5510.  The client is getting an address from a RADIUS server, not DHCP.  It's getting the correct address, but the wrong subnet mask and default gateway.

On our network, we are using a 10.x.x.x address scheme with a class B subnet mask.  The AnyConnect client is getting a class A netmask along with the incorrect default gateway.

How can I make sure that the AnyConnect client gets the correct settings?

Everyone's tags (4)