09-19-2016 02:41 PM - edited 02-21-2020 08:58 PM
Hello,
I'm looking for a confirmation regarding an existing ASA 5510 with license bellow. is the existing activated license can provide more than 2 connected users using anyconnect with tunnel mode for network access. thanks for feedback.
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1599 MHz,
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xfff00000, 1024KB
Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode : CNLite-MC-SSLm-PLUS-2_05
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.09
Number of accelerators: 1
0: Ext: Ethernet0/0 : address is 001d.7066.7b8a, irq 9
1: Ext: Ethernet0/1 : address is 001d.7066.7b8b, irq 9
2: Ext: Ethernet0/2 : address is 001d.7066.7b8c, irq 9
3: Ext: Ethernet0/3 : address is 001d.7066.7b8d, irq 9
4: Ext: Management0/0 : address is 001d.7066.7b89, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Disabled perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts : 0 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
Cluster : Disabled perpetual
09-19-2016 03:22 PM
Hi Sindibade 78,
That is correct, you have a basic license that allows 2 AnyConnect clients connected simultaneously.
Hope this info helps!!
Rate if helps you!!
-JP-
09-19-2016 03:25 PM
My question is to confirm more than 2 vpn tunnels via anyconnect? Thanks.
09-19-2016 06:54 PM
We don't use the term "vpn tunnels".
Your license will restrict you to no more than two simultaneous AnyConnect-based remote access VPN user sessions.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide