We are running anyconnect 4.2.04039 on some vehicles and when they hit poor cellular reception the anyconnect disconnects. I understand that part no network connectivity equals no vpn connection. What is being complained about is during the disconnect the PC (windows machine) tends to freeze up or stall. I have been looking into this, does anyone know if a disconnect from cellular or wifi that would cause the anyconnect client to disconnect, could this cause the PC to freeze momentarily?
A disconnect from the network should not cause the Anyconnect to freeze. The client should try to reconnect but a freeze/stall is not normal behavior. The version you are on is really old, you can try upgrading the affected machine alone to 4.5 and see if the issue still exists.
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...
Threat Hunting 101
In the latest Cisco Cybersecurity report, we explore all there is to know about threat hunting and provide a how-to guide for creating a threat hunting team.
Here are some of th...
What Is Cisco Identity Services Engine?
Cisco Identity Services Engine (ISE) is an all-in-one enterprise policy control product that enables comprehensive secure wired, wireless, and Virtual Private Networking (VPN) access.
Cisco ISE offers...