04-21-2012 04:12 AM - edited 02-21-2020 06:01 PM
Hi all,
We have bought L-ASA-AC-PH-5520=Anyconnect Vpn Phone License for our Cisco Phones but when we entered this license into our ASA it shows th following i.e enabled for linksys phones. Is there a diff part no to enable vpn for cisco phones.
# sh act
Xenel-ASA# sh activation-key
Serial Number: JMX1308L1R7
Running Activation Key: 0x2037c167 0x64402479 0x44d391c8 0xa084e840 0x8d0426b5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : 750
WebVPN Peers : 50
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Enabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions : 2
04-21-2012 10:27 AM
Raise a ticket with cisco licensing.
Sent from Cisco Technical Support iPad App
04-23-2012 12:09 AM
thanks Andrew,
We actually contacted cisco for tac support then they came with an answer that a simple bug created this problem
and then got back our required results.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide