04-21-2012 04:12 AM - edited 02-21-2020 06:01 PM
Hi all,
We have bought L-ASA-AC-PH-5520=Anyconnect Vpn Phone License for our Cisco Phones but when we entered this license into our ASA it shows th following i.e enabled for linksys phones. Is there a diff part no to enable vpn for cisco phones.
# sh act
Xenel-ASA# sh activation-key
Serial Number: JMX1308L1R7
Running Activation Key: 0x2037c167 0x64402479 0x44d391c8 0xa084e840 0x8d0426b5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : 750
WebVPN Peers : 50
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Enabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions : 2
04-21-2012 10:27 AM
Raise a ticket with cisco licensing.
Sent from Cisco Technical Support iPad App
04-23-2012 12:09 AM
thanks Andrew,
We actually contacted cisco for tac support then they came with an answer that a simple bug created this problem
and then got back our required results.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: