Hello all,
A customer has a ASA 5505 with a remote access vpn. They are moving their internal network to a new scheme and would like users who come in on the vpn to access both the exisiting and new networks. Currently the can only access the exisiting. WHen users connect to the remote access vpn, the asa gives them an address of 192.168.199.x. The current internal network is 200.190.1.x and they would like to reach their new network of 10.120.110.x.
Below is the config:
:
ASA Version 8.2(5)
!
hostname ciscoasa
enable password xxx encrypted
passwd xxx encrypted
names
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
ip address 200.190.1.15 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address xxxxxxx 255.255.255.0
!
banner exec UNAUTHORIZED ACCESS IS STRICLY PROHIBITED
banner login UNAUTHORIZED ACCESS IS STRICLY PROHIBITED
banner asdm UNAUTHORIZED ACCESS IS STRICLY PROHIBITED
ftp mode passive
access-list inside_access_in extended permit ip 200.190.1.0 255.255.255.0 any
access-list outside_access_in extended permit icmp any interface outside
access-list outside_access_in extended permit ip 192.168.199.0 255.255.255.192 host 10.120.110.0
access-list MD_IPSEC_Tun_Gp_splitTunnelAcl standard permit 200.190.1.0 255.255.255.0
access-list MD_IPSEC_Tun_Gp_splitTunnelAcl standard permit host 10.120.110.0
access-list inside_nat0_outbound extended permit ip 200.190.1.0 255.255.255.0 192.168.199.0 255.255.255.192
access-list inside_nat0_outbound extended permit ip host 10.120.110.0 192.168.199.0 255.255.255.192
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool Remote_IPSEC_VPN_Pool 192.168.199.10-192.168.199.50 mask 255.255.255.0
ip verify reverse-path interface outside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 200.190.1.0 255.255.255.0
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 190.213.43.1 1
route inside 10.120.110.0 255.255.255.0 200.190.1.50 1
route inside 192.168.50.0 255.255.255.0 200.190.1.56 1
route inside 192.168.60.0 255.255.255.0 200.190.1.56 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable 10443
http server idle-timeout 5
http server session-timeout 30
http 200.190.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
(omitted)
quit
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 3600
telnet timeout 5
ssh 200.190.1.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 5
dhcpd auto_config outside
!
threat-detection basic-threat
threat-detection scanning-threat shun
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
group-policy MD_SSL_Gp_Pol internal
group-policy MD_SSL_Gp_Pol attributes
vpn-tunnel-protocol webvpn
webvpn
url-list none
port-forward disable
hidden-shares none
file-entry disable
file-browsing disable
url-entry disable
group-policy MD_IPSEC_Tun_Gp internal
group-policy MD_IPSEC_Tun_Gp attributes
banner value Welcome to Remote VPN
vpn-simultaneous-logins 1
vpn-idle-timeout 5
vpn-tunnel-protocol IPSec webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value MD_IPSEC_Tun_Gp_splitTunnelAcl
address-pools value Remote_IPSEC_VPN_Pool
webvpn
url-list value RDP
username (omitted) attributes
vpn-group-policy MD_IPSEC_Tun_Gp
service-type remote-access
tunnel-group MD_SSL_Profile type remote-access
tunnel-group MD_SSL_Profile general-attributes
default-group-policy MD_SSL_Gp_Pol
tunnel-group MD_IPSEC_Tun_Gp type remote-access
tunnel-group MD_IPSEC_Tun_Gp general-attributes
address-pool Remote_IPSEC_VPN_Pool
default-group-policy MD_IPSEC_Tun_Gp
tunnel-group MD_IPSEC_Tun_Gp ipsec-attributes
pre-shared-key *****
!
!
prompt hostname context
: end
Joel
_______________________________
Please rate helpful posts and answered questions!
