cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
464
Views
0
Helpful
0
Replies
Highlighted
Beginner

ASA 5510 - trouble on DPD

ASA-5510, several VPN AnyConnect IKE-2 (IPsec).

I configure the Deed Peer Detection, but it does NOT work properly: when the client connection is interrupted abruptly, the VPN will remain active until the time-out.

The ASDM monitoring reports: AnyConnect-Parent none, without "assigned IP Address", but the session will be cleared only after the espiring of the idle time.

The associated configuration is as follows:

...

group-policy PIPPO attributes

...

split-tunnel-network-list value VPN_PIPPO

webvpn

  anyconnect ssl keepalive 20

  anyconnect dpd-interval gateway 30

  anyconnect dpd-interval client 30

...

Someone can give me a help ?

Thanks,

Claudio

Everyone's tags (3)