cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

690
Views
0
Helpful
0
Replies
Highlighted
Beginner

ASA Easy VPN Server and User level access

Hi,

I've set up an ASA 5505 box and configured it as an Easy VPN Server for clients to connect to the office externaly. For this i have created a coupe of users, 1 group-policy and 1 tunnel-group. How do i configure the ASA to permit and deny access to users depending on who logs in remotely? Here is a part of my tunnel-groups and group-policies.

group-policy mygroup-ezvpn internal

group-policy mygroup-ezvpn attributes

vpn-tunnel-protocol IPSec

split-tunnel-policy tunnelspecified

split-tunnel-network-list value EZVPN_SPLIT_TUNNEL

default-domain value bourghardt.se

username admin password ???? encrypted

tunnel-group 10.10.10.2 type ipsec-l2l

tunnel-group 10.10.10.2 ipsec-attributes

pre-shared-key *

tunnel-group mygroup-ezvpn type remote-access

tunnel-group mygroup-ezvpn general-attributes

address-pool EZVPN_POOL1

default-group-policy mygroup-ezvpn

tunnel-group mygroup-ezvpn ipsec-attributes

pre-shared-key *

Everyone's tags (4)
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here