I have a main office with 2 ASA one for principal o other for backup and two diferente ISP and this ASA's don't setup in HA.
Other side I have a remote ofiice with other ASA and only one ISP and I have a VPN over IPSec between both.
Now, I would like to create a backup or a VPN fom the remote to main office and i like in case a the principal ASA fail an like that the remote ASA try to conencto with the backup ASA and send the trafic for this link.
I dont know how to make that the remote ASA change the VPN peer o VPN conetion and send the traffic for it.
I make similar setup with two IPS channel but no with only one.
I know that for this work and need to change the routing traffic inside te main office but it's solve now, this is no the problem.
Any idea for solve it ? it's posible to setup in ASA 5505 ?
Setting up some 3rd party devices for my Fire and Rescue trucks that will VPN back to our FPR-2110. I can blatantly see what's going on with the IKEv2 platform and protocol debugs on. It's selecting the wrong dynamic map!IKEv2-PLAT-4: (32): Cry...
On January 22, 2020, the Cisco Product Security Incident Response Team (PSIRT) disclosed a vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC). The vulnerability could allow an unauthenticated, remote attac...
Meet the Authors Event - A Cybersecurity Deep Dive with Omar Santos
(Live event – Thursday, January 23rd, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event will have place on Thursday 23rd, January 2020 at 10hrs PDT
Posting this for anyone interested in using a Raspberry PI as a flow collector for Stealthwatch. We created a very lightweight version of our software. It can create flows if the eth port is attached to a SPAN or you can forward NetFlow/IPFIX ...