Hi all,For IKEv1, I use 1.3.6.1.4.1.9.9.171.1.2.3.1.35, however, it does not include IKEv2 tunnel of course.I only found one tread here mention "1.3.6.1.4.1.9.9.392", it seems working for ASA.But it does not work on Cisco CSR, I run "snmpwalk", got ...
Forum Posts
Hello About the vulnerability CVE-2024-20337, where cisco recommends upgrading to 5.1.2.42 to fix the vulnerability, but does this also apply to "Sucure Client UI"? Where I'm only have 5.1.0.1047 version- if so, where can I find the latest version fo...
Resolved! DMVPN Phase 3 issue
Hello All,I have a DMVPN phase 3 setup between a hub router and two spoke routers in a lab enviornment. below is my configrationHUB SPOKE1 SPOKE 2 tunnels come up on the hub just fine via the above configs as seen belowat this point that's when thing...
I'm trying to connect to a corporate SSL VPN on Windows 10, upon adding the VPN gateway and then hitting connect it goes to the sign-in dialog box but also returns a "certificate validation" failure error, then I choose the group and try to connect t...
I have one client that want's me to configure IPSec Remote VPN through his Cisco Router C1111 model. I have seen that i need security license for it to work.Is it possible to configure at least SSL VPN or are there any other types of Remote VPN servi...
Hello, Does anyone know if there's a way to configure Cisco Anyconnect for SSO where Windows login password credentials are automatically used by Anyconnect for authentication? Thank you
Hi,My company is operating ASA 555(version 9.4) and Cisco ASA516-x Threat Defense(version 6.6.5).Are they supporting IPSec connection to Zscaler Cloud?
Resolved! Untrusted Server Blocked! Solved!
I fixed my problem! Yay!
Resolved! ipsec certificate chain validation
Hi , I need help for my Scenario , appreciate for your help Scenario description: in this scenario SUB-CA1 and SUB-CA2 are in sub-ca mode . Site1 got its certificate from SUB-CA1 and Site2 got from Sub-CA2 in these routers Root-CA also Authent...
Resolved! Cisco ASA and anyconnect
Hello, we can't figure out what's wrong. We haven't been able to beat this for 2 weeks now. Help.We have configured AnyConnect VPN Client Connections, but we encountered a problem:When the client connects to AnyConnect VPN Client Connections, the cli...
I've attached my "show run" for the 3 routers, I'm trying to establish a VPN tunnel between router1 and router3(the internal network for Router1 is 192.168.1.0/24, and the internal network for Router3 is 192.168.3.0/24, with router2 in the middle) RO...
Hi all,I have the below configuration for a PPPoE session, and I get an IP from the server within the subnet 137.23.15.0/24 network on the dialer 0 interface. At the same time I have a vlan1 SVI with IP 137.23.15.137/29 that is connected back to my f...
Hello everyone,I hope you are doing well. I am writing this message in search of assistance and guidance for a problem I have been experiencing with Cisco AnyConnect on a new machine. First and foremost, I'd like to mention that Cisco AnyConnect work...
Dear all,TOPOLOGY :LAN ----------(10.0.101.200/24) ASA(5505) (XX.XX.129.21/30)------------ (XX.XX.129.22/30) ROUTER(ISP) (XX.XX.197.13/24) --------- INTERNETI try to configure my CISCO ASA 5505 for remote access vpn, and I encounter the following iss...
Resolved! DNS flush - Anyconnect VPN
Hello, Is it possible to automatically flush DNS before establshing vpn connection?Instead of manually use commands such asipconfig /flushdnsipconfig /releaseipconfig /renew
