VPN

We have 2 pixes (a 515 and a 506e) doing a vpn between the 2. The tunnel is up but the 506e side can not connect to anything. I do see the tunnel between the two is up.config of the 515 pix:access-list 100 permit icmp any any echo-replyaccess-list 10...

Here is a beginner questions.When a VPN tunnel is connected, where exactly does its packet stream enter the router's processing? i.e.:Are packets from the tunnel processed by the firewall on the inbound interface, or does they effectively bypass the ...

Can I use the VPN client with other vendors?I use it to connect to our Cisco Concentrator, but I need to connect to another network on a Netgear VPn, possible?

Hi All,I have been working this out for the past week.Hope maybe someone can help me configure this site-to-site vpn connectionbtw, i'm practically a new newbie i just been following the examples here at cisco but still can't make it to workAppreciat...

In an access-rule, is there a way to define a host by using its FQDN, without the IOS resolving the name to an IP address? My problem is that I'm trying to give my home PC secure access to my router's SDM, but my ISP changes my IP address every few ...

I have built a site to site VPN tunnel to an extranet that uses a seperate nat pool for VPN and Internet. The allows me access systems at the remote end. How, if at all, can I them access a particular host at my end. Can I have a unique host be ac...

Hi,I have a 515e with several VPN's client and site based but there is something stopping traffic initiated from the inside getting to the remote hosts. I've never seen anything like this before and can't see any probems with the config.The client P...

Hello,Our vpn to a client is not working. This error message was log in our syslog server. Thanks 02-04-2007 22:59:51 Local0.Error 172.22.14.254 Feb 04 2007 13:54:45: %PIX-3-305005: No translation group found for udp src inside:172.22.212.217/...

Hi sir,My company has been using a site2site VPN connecting the branch office and the HQ. Originally, the HQ only allow the branch network (172.29.4.64/27) to access the HQ network (192.168.10.0/24), and it works fine. Now the branch needs to access ...

HIWhen I configure peer to peer VPN first see each other ping or not.I have a router in remote side. I can ping there eastablish VPN there , see QM-Idel but i can not ping, but when delete IP from access-list then time i can ping.So it is wonder me t...

The following is the RFP from one of my customer.Please any one could provide the solution .I wold select ASA 5500 series for the VPN then what cisco product to choose for the Remote user logging and cetral database storage ofthe users details.1. Rem...

Dear All,What will be the minimum suggested hardware and license requirementfor ASA 5500 and IPS 4200 for CCIE security lab ?Can I have one ASA 5510 with Security Plus license and the other with Base license for failover configuration ?Also what will...

I am using VPN Client 4.8.01.0590 and I'm having a problem. The software installed fine, but when I added a connection entry and try to connect using that entry I get an error. "Reason 402: The connection manage was unable to read the connection en...

Hello, could anyone tell me please if you can use both digital certificates and also preshared keys on a PIX going to different sites via VPN?We are using a PIX 525 v7 our end and need to connect to a new site via certificates but we already use pre-...