cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

486
Views
0
Helpful
3
Replies
Highlighted
Beginner

Blocking Certain Applications via Clientless Portal AnyConnect

I need to setup a connection profile via ASDM v 6.3 for one user to have only access to one certain web application.  The user will only be logging into the web portal for remote access.  Can anyone tell me how to configure this in the ASA?

Greatly appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Blocking Certain Applications via Clientless Portal AnyConnect

Under ASDM --> Remote Access VPN --> Clientless SSL VPN Access --> Group Policies --> edit the relevant policy for your webvpn:

- Then under Portal: just disable everything but the bookmark that you have configured for that 1 particular web application.

Hope that helps.

3 REPLIES 3
Cisco Employee

Blocking Certain Applications via Clientless Portal AnyConnect

Under ASDM --> Remote Access VPN --> Clientless SSL VPN Access --> Group Policies --> edit the relevant policy for your webvpn:

- Then under Portal: just disable everything but the bookmark that you have configured for that 1 particular web application.

Hope that helps.

Beginner

Re: Blocking Certain Applications via Clientless Portal AnyConne

This is exactly what I needed to know. Thank you very much for your help.

Cisco Employee

Re: Blocking Certain Applications via Clientless Portal AnyConne

No worries, please kindly mark the question as answered so others can learn from your post. Thanks.