02-12-2010 04:20 PM
The problem started after I upgraded my 2811 router to IOS 15 (from 12.4xxx).
I had to reinstall VPN AnyConnect.
Router IP: 192.168.123.1
Connecting to VPN gives me 192.168.123.200
Now I can ping 192.168.123.1, but no more any other IP at the same subnet at all.
I have done a diff of the old config and the new one and can't find any difference on the webvpn parts and access-lists/NAT.
Any suggestions?
02-12-2010 04:23 PM
Can you share the current config?
Thank you,
Federico.
02-13-2010 01:11 AM
02-13-2010 03:32 AM
I tested now to put back the old IOS Version 12.4(15)T9.
I reinstalled the same AnyConnect package as I used for IOS 15... and now it works again, no change on firewall or NAT.
However I would really like to use IOS v15... so if anyone has a solution for this it would be very welcome...
02-13-2010 04:41 PM
I did one last try to upgrade to even newer IOS, ver.15.1-1.XB.
Then the webvpn context is impossible to get inservice (whatever hard I try I never get it away from "no inservice").
Doing no change at all else than going back to 12.4(15)T9 again, everything is normal once more...
To me it seems like AnyConnect on anything newer than 12.4(15)T9 does not work very well... Is there anyone out there running AnyConnect SSL successfully on the new 15.x versions?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide