Hi Guys,
Im having a bit of a strange problem, I never encountered before...
We have a ASA5515, Version 9.1 , and newest Anyconnection release .. It's working proper, but we have a bunch of our solution Architechts, there are having troubles with there anyconnect ...
The Scenario: The all run Windows 8, With Hyper-V ... The make a VM for each "project", and RDP to this VM .. In here they have the AnyConnect Client and this is the output they get:
"
The VPN connection was started by a remote desktop user whose remote console has been disconnected. It is presumed the VPN routing configuration is responsible for the remote console disconnect. The VPN connection has been disconnected to allow the remote console to connect again. A remote desktop user must wait 90 seconds after VPN establishment before disconnecting the remote console to avoid this condition."
I could imagine it somehow rejects the bridged way the VM runs its network on, og conflicts with its Local route table - but we have tried different VPN Solutions, and nothing to talk about there ...
A funny thing is when we log on to the Hyper-V , and Console the VM directly - the Anyconnect session succeeds .. The "AllowRemoteusers" is enabled in the profile ..
Any suggestions on this matter, anything would be mostly appreciated ..
Cheers,
Morten
