CIsco anyConnect error

[Imran Irshad]

Hi Experts,

Kindly let me know about error in attached screenshots. i tried to troubleshoot it but i could not get positive result.

 

[JP Miranda Z · Accepted solution]

Hi Imran Irshad,

The reason of that message is that your pool of address if not applied on the tunnel group, that is way says not address assigned.

Example

ip local pool Anytest 10.198.16.10-10.198.16.20

tunnel-group test general-attributes

address-pool Anytest

Hope this info helps!!

Rate if helps you!! 

[Imran Irshad]

Thank you JP Miranda Z,

I have already created local Pool and added in tunnel-group even i tried with re created Pool but same error message.

[JP Miranda Z · Accepted solution]

Hi Imran Irshad,

Can you share the configuration of the tunnel-group, group-policy and sh run webvpn?

Hope this info helps!!

Rate if helps you!! 

[Imran Irshad]

ASA5520# sh running-config tunnel-group

tunnel-group Anyconnect-VPN type remote-access
tunnel-group Anyconnect-VPN general-attributes
address-pool SSL-POOL
default-group-policy Anyconnect-VPN

ASA5520# sh running-config webvpn
webvpn
enable outside
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable

[JP Miranda Z]

Imran Irshad,

So you are not specifying any group alias or group url so your connections is going to the default tunnel group instead of the AnyConnect-VPN, with the following command everything should work fine:

ASA(config)#webvpn

ASA(config-webvpn)#tunnel-group-list enable

ASA(config-webvpn)#exit

ASA(config)#nnel-group Anyconnect-VPN webvpn-attributes

ASA(config-tunnel-webvpn)#group-alias Anyconnect-VPN enable

ASA(config-tunnel-webvpn)#exit

After that you can try again and everything should work fine.

Hope this info helps!!

Rate if helps you!! 

[Imran Irshad]

Thank you JP,

i got another error. 

[JP Miranda Z · Accepted solution]

Ok, now i believe we are missing information about what you are trying to do, can you explain me what you are trying to achieve here?

Are you trying to run a Windows script to initiate the AnyConnect?

Are you using the AnyConnect on a server?

Hope this info helps!!

Rate if helps you!! 

-JP-

[Imran Irshad]

Thank you JP,

I tried on win 7, 10 and got error,   "Unable to Establish VPN"   :(

[JP Miranda Z]

Hi Imran Irshad,

Have you tried re installing the client?

Hope this info helps!!

Rate if helps you!! 

-JP-

[Imran Irshad]

Thank you JP   :)