I am having some issue attempting to get the Cisco AnyConnect app for iOS 13 to see certificates that are being installed via our MDM solution. If the certificate is installed via a VPN connection it shows in the AnyConnect app's certificates, but it does not see any other certificates that we have deployed to the device via our MDM.
Is Anyconnect able to see all certificates on the device, or will it only see certificates that AnyConnect will accept? From what I can see the certificate that is being deployed via the MDM is using the same template as what is being deployed by Anyconnect.
Edit, I would like to clarify, I have tested the same SCEP deployement method with Android, and it works. For android I was able to import from the local cert store on the devices. On iOS the import only gives the ability to import via URL. Also, I am using Microsoft Intune.
Setting up some 3rd party devices for my Fire and Rescue trucks that will VPN back to our FPR-2110. I can blatantly see what's going on with the IKEv2 platform and protocol debugs on. It's selecting the wrong dynamic map!IKEv2-PLAT-4: (32): Cry...
On January 22, 2020, the Cisco Product Security Incident Response Team (PSIRT) disclosed a vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC). The vulnerability could allow an unauthenticated, remote attac...
Meet the Authors Event - A Cybersecurity Deep Dive with Omar Santos
(Live event – Thursday, January 23rd, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event will have place on Thursday 23rd, January 2020 at 10hrs PDT
Posting this for anyone interested in using a Raspberry PI as a flow collector for Stealthwatch. We created a very lightweight version of our software. It can create flows if the eth port is attached to a SPAN or you can forward NetFlow/IPFIX ...