cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2986
Views
0
Helpful
6
Replies

cisco anyconnect long time to logon complete

mostafa.z
Level 1
Level 1

hi,

I configure cisco asa 5545x with firepower and config vpn remote access anyconnect. when client connect with anyconnect long time to untrust certificate (20 second) and to complete 50 second ,

with cisco vpn client when connect click user and pass and connected,

but with anyconnect long time to connect completed.

i change bypassdownload to true in file aneconnect xml but long time to connect

 

1 Accepted Solution

Accepted Solutions

its ok, i change add ip to name then its ok
tnks

View solution in original post

6 Replies 6

How are you authenticating users (locally or external).? Is the delay in
initial connect or after entering the password?

hi, authentication is local and delay when initialing .

In this case, I suggest to start with a pcap capture on client and ASA to
see if there is a delay between packets leaving the client and packets
arriving at ASA. If this is within reasonable range (for example < 200
msec) then you need to debug webvpn anyconnect 127 to see what processing
is done by ASA.

Check the cpu and memory usage of the ASA as well.

hi , i capture and video vpn connect 

this file wireshark 

its ok, i change add ip to name then its ok
tnks
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: