cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

128
Views
0
Helpful
0
Replies
Highlighted
Beginner

Cisco ASA 5525 not passing VPN Site to Site traffic

Cisco ASA 5525 not passing VPN Site to Site traffic, last time I fixed the issue I issued the command::

nat (inside,outside) source static obj-172.18.0.0 obj-172.18.0.0 destination static obj-172.25.1.0 obj-172.25.1.0 no-proxy-arp route-lookup

nat (inside,outside) source static obj-172.18.0.0 obj-172.18.0.0 destination static obj-172.16.0.0 obj-172.16.0.0 no-proxy-arp route-lookup

nat (inside,outside) source static obj-172.18.0.0 obj-172.18.0.0 destination static obj-172.30.0.0 obj-172.30.0.0 no-proxy-arp route-lookup

 

but I'm getting the error :: obj-172.20.0.0 doesn't match an existing object or object-group (as example)

I dont' remember how to manually put in the object group (I guess).

I put in

object network obj-172.20.0.0

subnet 172.20.0.0 255.255.0.0

which did not work, same error..

I see object group but not sure how it should be grouped or entered?

Help would be appreciated

Thank You

Thank You

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here