08-18-2016 02:18 AM
Hi All,
I have 2 queries - kindly assist
1. For ipsec remote client vpn ikev1, is there any license restrictions ?
2. Major differences between above and Anyconnect ?
~shall rate if helpful :)
Solved! Go to Solution.
08-18-2016 03:44 AM
1. Yes, there is a restriction based on the number of concurrent users connected with VPN. You can see the number of licenses under 'Other VPN Peers' when you run show version on your ASA.
2. The major difference is AnyConnect can use SSL or IPsec (IKEv2) for the tunnel whereas the classic VPN Client only runs on IKEv1. Also note that the old VPN Client is no longer supported by Cisco.
Hope this helps.
08-18-2016 03:44 AM
1. Yes, there is a restriction based on the number of concurrent users connected with VPN. You can see the number of licenses under 'Other VPN Peers' when you run show version on your ASA.
2. The major difference is AnyConnect can use SSL or IPsec (IKEv2) for the tunnel whereas the classic VPN Client only runs on IKEv1. Also note that the old VPN Client is no longer supported by Cisco.
Hope this helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: