cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

36864
Views
10
Helpful
9
Replies
Highlighted
Beginner

Cisco Router 1941 - crypto isakmp policy command missing - IPSEC VPN

Hello everyone,

I have been looking around and I can not find the " crypto isakmp policy " command on this Cisco Router 1941.  I just wanted to setup a regular IPSEC Lan to Lan tunnel and surprise, the command is not there.  Do I have the wrong IOS? I thought that a K9 image would do the trick.

Any suggestions are appreciated

This is what I get:

Router(config)#crypto ?
  ca   Certification authority
  key  Long term key operations
  pki  Public Key components

SHOW VER

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 10-Mar-10 22:27 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)

Router uptime is 52 minutes
System returned to ROM by reload at 02:43:40 UTC Thu Apr 21 2011
System image file is "flash0:c1900-universalk9-mz.SPA.150-1.M2.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command

This product contains cryptographic features ....

Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
Processor board ID FTX142281F4
2 Gigabit Ethernet interfaces
2 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)

License Info:

License UDI:

-------------------------------------------------
Device#   PID   SN
-------------------------------------------------
*0     CISCO1941/K9          FTX142281F4   

Technology Package License Information for Module:'c1900'

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot 
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      None          None          None
data          None          None          None

Configuration register is 0x2102

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco Router 1941 - crypto isakmp policy command missing - I

You would need to obtain the Security feature license in order to configure IPSec VPN.

Currently you have "none" for the Security feature:

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot 
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      None          None          None
data          None          None          None

Here is the more information on licensing on 1900 series router:

http://www.cisco.com/en/US/partner/docs/routers/access/1900/hardware/installation/guide/Software_Licenses.html

View solution in original post

9 REPLIES 9
Cisco Employee

Re: Cisco Router 1941 - crypto isakmp policy command missing - I

You would need to obtain the Security feature license in order to configure IPSec VPN.

Currently you have "none" for the Security feature:

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot 
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      None          None          None
data          None          None          None

Here is the more information on licensing on 1900 series router:

http://www.cisco.com/en/US/partner/docs/routers/access/1900/hardware/installation/guide/Software_Licenses.html

View solution in original post

Beginner

Re: Cisco Router 1941 - crypto isakmp policy command missing - I

That was really fast!! thank you, I will talk to my provider.

Beginner

Thanks. had the same problem

Thanks. had the same problem and was able to resolve it using the provided link. Thanks.

Beginner

Re: Thanks. had the same problem

Me too, Kindly help me.
Beginner

Re: Cisco Router 1941 - crypto isakmp policy command missing - I

thanks this link but i unable to open any forms and url.

 

so kindly do me help please.

Re: Cisco Router 1941 - crypto isakmp policy command missing - I

I get the same proble with my cisco 1921, 

it's the simple to solve .
In config mode just type this commande "license boot module c1900 technology-package securityk9 "

 

Config}# license boot module c1900 technology-package securityk9
 
After that valide the command and accept the agreement .
Save your running-config and reload . it' s okay now 

Re: Cisco Router 1941 - crypto isakmp policy command missing - I

And how long is the license?

Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Evaluation securityk9
data None None None

Re: Cisco Router 1941 - crypto isakmp policy command missing - I

I get the same problem with cisco 1921, your links help me so much.
In config mode to enable crypto and security license, just type 

Config}# license boot module c1900 technology-package securityk9
 
After it will ask you to accept an agreement , type yes , save the running-config and reload ; it' s ok now 
Beginner

Kindly follow this blog .

Kindly follow this blog .

It shows you how to install the security license 

http://ciscofortinet.blogspot.com/

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here