I need Cisco VPN client for Microsoft Windows 8.1 Pro. I tried multiple vpn clients but no one is working, actually VPN client is installing sucessfully and even its connecting too using the vpn clients but not able to get connect to remote desktop of any internal servers.
The Cisco VPN client is end of sales and not supported on Windows 8.1 (or Windows 8).
The current Cisco client - Anyconnect Secure Mobility Client - is supported on Windows 8 and 8.1. (Reference)
Depending on your VPN headend, you amy be able to update the remote access VPN to use Anyconnect.
Hope this helps.
According to the link you provided, and according to this table in the link; does that mean the newest anyconnect VPN client will work with ASA 8.2 software?
Thank you again Marvin, you are very knowledgable and helpful.
The following table identifies the minimum versions of Cisco Secure Desktop and the Cisco AnyConnect that are required for the Adaptive Security Appliance and Adaptive Security Device Manager releases:
184.108.40.206 (subsequently referenced as “3.1.1”)3
I just downloaded it from here and the Windows 7 x64 worked just fine on my Windows 8.1:
This article describes a registry hack to fix the VPN Client in 8.1
How to Install Cisco VPN Client 5.0.07.0440-k9 on Windows 8.1 :
on Windows 8.1 you will need to update the DNE so :
I tried it and it works
let me know
Try to create a outside interface access policy source vpn pool destination inside network service ip with permit.
Make sure do you have Exempt NAT with VPN pool.
I had the same issue.
Dowload Forefront Threat Management Gateway (TMG) and install
Restart your system. It worked for me. Hope it work for you also.