Connect to ISA server through a PIX

[Paul.Lane]

I need to allow a customer through my PIX

to authenticate to a Microsoft ISA server. I'm going to setup up a NAT to allow the customer in [Allow only their IP to go to the ISA server]. Is there any fixup protocol or port[s] I need to open up. Any info would be appreciated.

Thanks

Paul Lane

[jmia]

Hello Paul,

Is the customer coming in from the outside (internet)? If so then you'll require a static and ACL, here's a good document to get you going:

http://www.cisco.com/warp/public/707/28.html

Let me know how you get on.

Regards - Jay