09-06-2012 05:25 PM
Hey Guys
Justing wondering if I can bulid a ssl web vpn in ipv6 network.
Ive read thru the SSL VPN document from Cisco and found it saying:
CiscoAnyConnect VPN Client does not support the following:
• Datagram Transport Layer Security (DTLS) with SSL connections
• Standalone Mode
• IPv6 VPN access
Does it means I can not create an ipv6 ssl vpn by using cisco router and anyconnect softwre?
Cheers.
09-06-2012 07:04 PM
Hi Jerson,
Please check this out:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/release/notes/anyconnect31rn.html#wp998540
I hope it helps
Please rate any posts you find useful.
Portu
Sent from Cisco Technical Support Android App
09-07-2012 06:50 AM
Hi Javier
Thanks for reply.
Ive read document you supplied but still have no exact idea on it.
As I only got two Cisco 2811 routers with IOS 12.4 and two client PCs, is it possible to build an ipv6 ssl vpn on one of the routers?
If so, is there any guide for it?
All good.
09-07-2012 08:14 AM
Thanks for your prompt response.
Please check this out:
IOS Support by AnyConnect 3.1.x
I think you will have to upgrade the IOS to 15.x in order for this to work.
Let me know.
Portu.
Please rate any posts you find useful.
09-07-2012 12:26 PM
I agreed with Javier.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: