Was hoping to get some help on this. We have a spare ISR 2821 with 2 WIC-2AM-V2 cards. We would like to be able to use this router as a backdoor dialup connection incase our VPN/Internet connection goes out. Is it possible to do this with this router and if so is there a sample config I could look at?
In the end I'd like to have this router be able to accept dial-in connections to allow us access to our network with the proper authentication (TACACS+)
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...
Threat Hunting 101
In the latest Cisco Cybersecurity report, we explore all there is to know about threat hunting and provide a how-to guide for creating a threat hunting team.
Here are some of th...
What Is Cisco Identity Services Engine?
Cisco Identity Services Engine (ISE) is an all-in-one enterprise policy control product that enables comprehensive secure wired, wireless, and Virtual Private Networking (VPN) access.
Cisco ISE offers...