DMVPN Per Tunnel QOS Error "service-policy with queueing features..."
Am working on a DMVPN Design. Had followed all the guides and practices, but the hub is refusing to map the service-policy to the spoke.
priority percent #
bandwidth remaining percent #
bandwidth remaining percent # ! policy-map 8M-SHAPER class class-default shape average 7600000 service-policy OUTPUT ! ! int tunnel1 ip address x.x.x.x x.x.x.x ... nhrp map group 8M-SHAPER service-policy output 8M-SHAPER ... tunnel mode gre multipoint tunnel preotection ipsec profile DMVPN shared ...
I've omitted all the irrelevant stuff, basically the SA's are building, but i am getting the following error when the tunnels build:
%NHRP-3-QOS_POLICY_APPLY_FAILED: Failed to apply QoS policy 8M-SHAPER mapped to NHRP group 8M-SHAPER on interface tunnel1, to tunnel x.x.x.x due to policy installation failure.
service-policy with queueing features on SA sessions are not allowed
in conjunction with dmvpn based queueing policy.
any idea where the issue lies with this? its doing my head in.
Posting this for anyone interested in using a Raspberry PI as a flow collector for Stealthwatch. We created a very lightweight version of our software. It can create flows if the eth port is attached to a SPAN or you can forward NetFlow/IPFIX ...
Dear Team Suppose we have hundreds of rules in access policy on cisco fmc device. Now I want to fetch all access policy rules in which I have mentioned some specific port number X. Can anyone help me with the process to fetch the same?
Greetings everyone, Happy New Year! I would like to thank you all for making our ISE demos in dCloud a great success!
The ISE instant demo has been in the top 5 of Enterprise demos for a long time now and recently just moved into the #1 and 2 slots...
User Experience Enhancements
As part of the Cisco Common User Experience program, we are working towards a more uniform user experience and terminology alignment. This program runs across all Cisco security products.
A More Intuitive Cognitiv...