11-12-2012 01:27 AM
Hi All.
I'm trying to setup VPN connections on 2 different routers and I'm not sure about that Do I need a security license to setup VPN connection on router?
First one is 1941-K9 site-to-site.
Second one is 887G-K9, EasyVPN connection.
Both of them don't work properly. What do I need to check on both routers to see if they're abled for vpn connection, maybe some commands as well.
Thanks in advance.
Regards,
Solved! Go to Solution.
11-12-2012 01:38 AM
yes, for VPN you need a security-license.
The 1941 should show the following line:
rtr-01#sh ver | b Technology
Technology Package License Information for Module:'c1900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
data None None None
The 887 comes by default with the "Advanced Security" feature-set. That's all you need for that device.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
11-12-2012 01:38 AM
yes, for VPN you need a security-license.
The 1941 should show the following line:
rtr-01#sh ver | b Technology
Technology Package License Information for Module:'c1900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
data None None None
The 887 comes by default with the "Advanced Security" feature-set. That's all you need for that device.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
11-12-2012 01:53 AM
Thanks for your reply.
Yes, 1941 doesn't show that, everything NONE there, so will get license then.
And 887G probably has some errors in configuration. EasyVPN connects to remote site (887G) and it shows 3 VLANs but I can ping only router and not other devices.
Regards
11-12-2012 02:14 AM
For the VPN-Problems you should open a new topic and share you config and problem-description there.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
11-12-2012 03:48 AM
Thanks, will do that.
At the moment the Evaluation period was enabled, so I can use securityK9 license for 8 weeks and 4 days.
Cheers,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: