10-06-2015 01:08 AM
Hi guys,
I just installed a public signed certificate from GlobalSign to avoid that certificate warning each time I was using Anyconnect SSL. Certificate was added as Identity Certificate and then on SSL Settings I selected it as TrustPoint.
I am running:
show boot
BOOT variable = disk0:/asa916-8-smp-k8.bin
Current BOOT variable = disk0:/asa916-8-smp-k8.bin
Now VPN works as expected, but when accessing from outside https://domain.com/admin I receive No data received on Chrome.
As detail, Chrome says: Unable to load the webpage because server sent no data.
Can you share some thoughts of how should I troubleshoot this?
Solved! Go to Solution.
10-06-2015 07:42 PM
do you have http access enabled on your outside interface from the pool subnet?
10-06-2015 07:42 PM
do you have http access enabled on your outside interface from the pool subnet?
10-07-2015 01:36 AM
You're right I tested it from home where obviously SSL vpn was working but no HTTP access was granted.
Thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: