I have an ASA 5505 setup as Easy VPN Client. Current setup uses two interfaces: inside and outside. I have tested connection to the server and works fine.
Because of specific site reasons I am restricted to one interface only, you can call it inside, lan, whatever. So I need to connect remote site's clients behind this interface and also use it to reach Easy VPN Server. Is this possible in the first place?
Obviously I will place the default route through inside interface and another router will be provide Internet connection.
Solved! Go to Solution.
I raised a TAC ticket and one miss or lady informed me I need at least two interfaces.
Pretty dissappointing if you ask me.