I using cisco 837 for incoming remote access VPN connections with are working very well but I recently created one outgoing easy vpn connection and I have issue since that time.
As soon as easy VPN is up and established successfully I lost remote VPN access to internal subnet.
Where is :
Internal subnet: 192.168.172.0/24
remote VPN pool 192.168.24.2-6
Take a look at config attached and point me at missconfiguration please.
Solved! Go to Solution.
Unfortunately you can't configure easy vpn client on the same router as easy vpn server.
For your remote access vpn, the router is configured as an easy vpn server.
When you try to connect and establish an outgoing easy vpn, then the router itself becomes an easy vpn client.
Hence not supported.
You can configure the router as a LAN-to-LAN peer instead for the outgoing VPN connection.