cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

264
Views
0
Helpful
5
Replies
Beginner

Enabling AnyConnect

At the moment users have two ways of accessing our network, one is using the Windows VPN clinet, the other via the portal using https

I'm interested to look at other, more universal ways for people to work with tablets, etc and would like to know whether enabling the AnyConnect feature is viable and whether it's just a case of enabling it by ticking the option 'enable cisco anyconnect' and ensuring a connection profile is section (of which I can see our existing ones)?

PS -I did select the box and it mentioned something about an image required

Thanks       

5 REPLIES 5
Cisco Employee

Enabling AnyConnect

what do you have IOS router or Cisco ASA ?

Beginner

Enabling AnyConnect

ASA 5510 running ASA Version 8.2(2)

Contributor

Enabling AnyConnect

PS -I did select the box and it mentioned something about an image required

Yes, you should have the image(s) of anyconnect downloaded to flash of your asa and that image(s) should be pointed to using anyconnect image command. You should have on flash images for all types of devices, that'll use anyconnect.

example for windows image:

anyconnect image disk0:/anyconnect-win-3.0.5075-k9.pkg 1

Highlighted
Contributor

Enabling AnyConnect

You also have to create a certificate and enable outside access for anyconnect. It's not really difficult

Michael Please rate all helpful posts
Enthusiast

Enabling AnyConnect

Please Refer to Article that might help you

http://www.ciscopress.com/articles/article.asp?p=1924984

Jawad