I have an ASA which connects to a BT Inifinty router. The address on the outside interface is dynamic. BT provide us with 5 static addresses (No NAT 5) which are routed to the outside interface but are a different subnet.
I would like to terminate the site to site VPN using one of the static IP addresses rather than the outside dynamic address.
Can I NAT the public static address to the DMZ interface (or any interface for that matter) and terminate the VPN on that interface i.e. the firewall is terminated through the firewall?
Update: A few people have looked but no answer. Is there some detail I need to add?
Enable full visibilityCreating first policy setUnderstanding ISE Live Log status
These are few tips that will help you with your first deployment of ISE. For advanced tips, please visit: https://community.cisco.com/t5/security-documents/advanced-i...
This guide helps in troubleshooting the IBM QRadar pxGrid App. It is assumed that the ISE pxGrid App has already been installed in QRadar. The official IBM QRadar pxGrid App How-to Guide can be downloaded from: https://exchange.xforce.ibmcloud.com/...
Join us live on Tuesday, July 16 at 10 am PT to learn how integration and automation are the key to successful security designs. We’ll answer questions about Threat Response and also do a quick demo of our browser plugin and our latest integration wi...
Hello and welcome to the repository for the Monthly Webinar Series put together by our Desert Plains Operation Security Architecture team.
Our sessions are NOT recorded -- however you'll find historical slide decks attached as well as futu...
In June we have had new additions to our growing list of Machine-Learning-powered Confirmed Threat detections provided by the Cognitive Intelligence engine. Thanks to the improvement made to our Machine Learning backend (see Machine Learning Backend Impro...